Vehicle security alarm, To arm, Getting started – Jeep 2014 Compass - User Guide User Manual

Page 14

Advertising
background image

WARNING!

• Do not start or run an engine in a closed garage or confined area. Exhaust gas

contains Carbon Monoxide (CO) which is odorless and colorless. Carbon
Monoxide is poisonous and can cause serious injury or death when inhaled.

• Keep Key Fob transmitters away from children. Operation of the Remote Start

System, windows, door locks or other controls could cause serious injury or
death.

VEHICLE SECURITY ALARM

This Vehicle Security Alarm monitors the doors, liftgate, and ignition switch for
unauthorized operation.

When the alarm is activated, the interior switches for door locks are disabled. The
Vehicle Security Alarm provides both audio and visual signals repeatedly for three
minutes. If the disturbance is still present (driver's door, passenger door, other doors,
ignition) after three minutes, the parking lights and tail lights will flash for an
additional 15 minutes.

To Arm:

• Lock the door using either the power door lock switch (one door must be open) or

the LOCK button on the Remote Keyless Entry (RKE) transmitter (doors can be
open or closed), and close all doors.

The Vehicle Security Light in the instrument cluster will flash for 16 seconds. This
shows that the Vehicle Security Alarm is arming. During this period, if a door is
opened, the ignition is cycled to ON/RUN, or the power door locks are unlocked in any
manner, the Vehicle Security Alarm will automatically disarm.

NOTE:

• The Vehicle Security Alarm will not arm if you lock the doors with the manual door

lock plungers.

• Once armed, the Vehicle Security Alarm disables the unlock switch on the driver

door trim panel and passenger door trim panel.

GETTING STARTED

12

Advertising