Lap/shoulder belt operating instructions – Jeep 2014 Wrangler - Postal Supplement User Manual

Page 12

Advertising
background image

WARNING! (Continued)

Do not allow people to ride in any area of your

vehicle that is not equipped with seats and seat
belts.

Be sure everyone in your vehicle is in a seat and

using a seat belt properly.

Wearing a seat belt incorrectly is dangerous. Seat

belts are designed to go around the large bones of
your body. These are the strongest parts of your
body and can take the forces of a collision the best.
Wearing your belt in the wrong place could make
your injuries in an accident much worse. You might
suffer internal injuries, or you could even slide out
of part of the belt. Follow these instructions to wear
your seat belt safely and to keep your passengers
safe, too.

(Continued)

WARNING! (Continued)

Two people should never be belted into a single

seat belt. People belted together can crash into one
another in an accident, hurting one another badly.
Never use a lap/shoulder belt or a lap belt for more
than one person, no matter what their size.

Lap/Shoulder Belt Operating Instructions

1. Enter the vehicle and close the door. Sit back and

adjust the seat.

2. The seat belt latch plate is above the back of the front

seat and next to your arm in the rear seat. Grasp the
latch plate and pull out the belt. Slide the latch plate
up the webbing as far as necessary to allow the belt to
go around your lap.

10

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

Advertising