Jeep 2015 Grand Cherokee SRT - User Guide - Manual (Page 202)

4. For the front axle, place the jack on the body flange just behind the front tire as
indicated by the triangular lift point symbol on the sill molding.
Do not raise the vehicle until you are sure the jack is fully engaged.
5. For a rear tire, place the jack in the
slot on the rear tie-down bracket, just
forward of the rear tire (as indicated
by the triangular lift point symbol on
the sill molding).
Do not raise the vehicle until you are sure the jack is fully engaged.
6. Raise the vehicle by turning the jack
screw clockwise. Raise the vehicle
only until the tire just clears the sur-
face and enough clearance is ob-
tained to install the spare tire. Mini-
mum tire lift provides maximum
stability.
7. Remove the lug nuts and wheel.
Front Jacking Location
Rear Jacking Location
WHAT TO DO IN EMERGENCIES
200