Programming additional transmitters, Transmitter battery replacement – Jeep 2015 Patriot - Owner Manual User Manual

Page 27

Advertising
background image

Programming Additional Transmitters

Refer to Sentry Key® “Customer Key Programming.”
If you do not have a programmed RKE transmitter,

contact your authorized dealer for details.

Transmitter Battery Replacement

NOTE:

Perchlorate Material – special handling may ap-

ply. See www.dtsc.ca.gov/hazardouswaste/perchlorate
The recommended replacement battery is CR2032.
1. If the RKE transmitter is equipped with a screw,

remove the screw. With the RKE transmitter buttons

facing down, use a flat blade screwdriver to pry the

two halves of the RKE transmitter apart. Make sure

not to damage the elastomer seal during removal.

2. Remove and replace the battery. Avoid touching the

new battery with your fingers. Skin oils may cause

battery deterioration. If you touch a battery, clean it

with rubbing alcohol.

3. To reassemble the RKE transmitter case, snap the two

halves together.

Separating Case Halves

2

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 25

Advertising