Kendon Single Ride-Up SRL Trailer Retrofit Kit User Manual
Page 9
714-630-7144
www.KendonUSA.com
- 7 -
Install the supplied new rubber latch in the location of the drilled hole on the
front section of the trailer. Use the hardware from the old latch and tighten.
Congratulations! You now have a Kendon Single Ride-Up SRL Stand-Up™
Motorcycle Trailer.
Attach ramps included in the retrofit kit according to the instructions manual for
the Single Ride-Up SRL Stand-Up™ Trailer that is included with the retrofit kit.
Thoroughly read and understand the Instructions Manual for the Single
Ride-Up SRL Stand-Up™ Trailer that is included with the retrofit kit.
If you lost or need additional copies of any of the instructions manuals
referenced here, please visit our web site at www.KendonUSA.com or
contact us at 714-630-7144 or [email protected].
Trailer owner is responsible for complying with all the recommended
procedures in this instruction manual. Use at your own risk. Kendon is
not responsible for injury, liability, property damage and/or any
consequential damage(s) caused by the misuse of this product.
Thank you again for purchasing our Kendon product. If you have any questions
on the proper use of this trailer or its parts please see your authorized dealer or
contact Kendon Direct at 714-630-7144 or [email protected].
Enjoy your updated Kendon Single Ride-Up SRL Trailer.
Ride safe
Trailer safe
Kendon Industries, Inc.
3711 East La Palma Avenue
Anaheim, CA 92806
714-630-7144 Telephone
714-630-7132 Facsimile
www.KendonUSA.com
facebook.com/kendonusa