Kendon Dual Ride-Up SRL Trailer Retrofit Kit - Manual (Page 4)

714-630-7144 www.KendonUSA.com
- 2 -
Thoroughly read and understand the
Owner’s Manual for the Dual Ride-
Up SRL Stand-
Up™ Trailer that is included with the retrofit kit.
If you lost or need additional copies of any of the instructions manuals
referenced here, please visit our web site at www.KendonUSA.com or
contact us at 714-630-7144 or [email protected].
Tools Required
 ¼” Allen Wrench
 3
/
16
” Allen Wrench
 ½” Socket
 9
/
16
” Socket
 1
/
2
” Combination Wrench
 9
/
16
” Combination Wrench
 ¾” Wrench

Phillips Screw Driver

Flat Blade Screw Driver
 1
/
4
" or
3
/
8
” Drive Ratchet

Channel Lock Pliers
Parts List
( 1 ) Dual Ride-Up Rear Section
( 1 ) Rear Section Foot Extension
( 2 ) Front Section Foot Steps
( 2 )
Step Clamp Assemblies (Includes 2 x 5/16”-18x2-1/2” Hex caps and 2
x 5/16”-18 Thin Nyloc Nuts)
( 1 ) Loading Ramp with fold-out foot boards (pre-assembled)
( 1 ) Ramp Strap
( 2 )
5
/
16
”-18 T-Bolt Assemblies (with washers)
( 1 ) 8
” Rubber Latch Anchor Bracket
( 1 )
5
/
16
” x 1 ¼” x 1/16” Fender Washer
( 1 )
5
/
16
”-18 Nylon Insert Locknut
( 2 ) 3/8” x 1” Detent Ring Pins
( 1 )
5
/
16
”-18 x 2” Hex Bolt
( 1 ) Dual Ride-Up SRL Trailer Retrofit Kit Installation Instructions
( 1 ) Dual Ride-Up SRL Stand-
Up™ Trailer Owner’s Manual