Kontron CP342 - Manual (Page 47)

Doc.ID: 34938, Rev 1.0 Page A - 3
CP342 CP-RIO3-42
CUSTOMER SPECIFIC
P R E L I M A R Y
A. CP-RIO3-42
A.1 Overview
The CP-RIO3-42 provides optional rear I/O connectivity for Gigabit Ethernet. Is is designed for
use in conjunction with the CP342-RIO board or any other rear IO capable board with appro-
priate signal conditioning and pinout on the J1 connector.
There are two Gigabit Ethernet ports available, but without operational status LEDs. This board
is passive in that it only provides signal routing to the RJ45 connectors, therefore, all signals
coming from the associated CPCI-bus front side board must have corresponding signal condi-
tioning which is the case with the CP342-RIO board. If used with any other front side board,
this must be taken into consideration.
A.2 Front Panel
Figure A-1: CP-RIO3-42 Front Panel
CP-RIO3-42