Kontron CPS3003-SA - Manual (Page 11)

D R A F T — F O R I N
T E R N A L U S E O N L Y
11 www.kontron.com
User Guide
CPS3003-SA
1.2 System Expansion Capabilities
1.2.1 CPS3003-EXTIO Extension Module (8 HP)
The CPS3003-EXTIO module for the 8 HP CPS3003-SA version provides one USB 3.0 port, one COM port,
and one CFast socket on the front panel. For further information on the CPS3003-EXTIO extension mod-
ule, refer to Chapter 6.
1.2.2 CPS3003-BRIDGE Extension Module (9 HP)
The CPS3003-BRIDGE module for the 9 HP CPS3003-SA version provides one USB 3.0 port, one COM
port, and one CFast socket on the front panel. In addition, the CPS3003-BRIDGE module is equipped
with a PCI Express-to-PCI bridge which converts PCI Express signals into PCI signals and makes them
available on the
CompactPCI interface. For further information on the CPS3003-BRIDGE extension
module, refer to Chapter 7.
1.2.3 CPS-RIO3-01 Rear Transition Module
The CPS-RIO3-01 rear transition module provides comprehensive rear I/O functionality, such as one
DisplayPort, two COM ports, two Gigabit Ethernet ports, one USB 3.0 port, and one USB 2.0 port. For
further information on the CPS-RIO3-01 rear transition module, refer to Chapter 8.
1.2.4 Smart Extension Module
The Smart Extension Module can be used with the 4 HP CPS3003-SA and expands the onboard I/O ca-
pability providing one additional SATA cable connector as well as one USB 2.0 connector thereby facil-
itating the connection to system-internal USB and SATA devices. For further information on the Smart
Extension Module, refer to Chapter 9.
Note: If a Smart Extension Module is installed on the CPS3003-SA, the board width exceeds 4 HP.
1.2.5 SATA Flash Module
The SATA Flash module can be used with the 4 HP CPS3003-SA and provides up to 32 GB of SLC NAND
flash memory. For further information on the SATA Flash module, refer to Chapter 10.
1.3 Board Diagrams
The following diagrams provide additional information concerning board functionality and component
layout.