Table 3-2: rj45 pin assignment – Kontron CP-RIO6-923 User Manual
Page 24
Hardware Description
10
CP-RIO6-923 User Guide
www.kontron.com
Note that ports marked with a '-' are not available on the RIO module.
On the CP-RIO6-923-9, backplane contacts of FL12 to FL14 are removed to increase signal quality in applica-
tions were these ports connect to other cPCI slots on the backplane. Covers are plugged into the correspond-
ing non-functional RJ45 ports.
The RJ45 connectors are not equipped with LEDs for displaying the link status or activity. These are on the
switch board front panel.
The following table shows the pin assignment of one 10/100/1000BASE-T RJ45 connector.
FL_18
18x
18x
FL_19
19x
19x
FL_20
20x
20x
FL_21
21x
21x
FL_22
22x
22x
FL_23
23x
23x
Table 3-2:
RJ45 Pin Assignment
Signal
Pin
BI_DB+
1
BI_DB-
2
BI_DA+
3
BI_DD+
4
BI_DD-
5
BI_DA-
6
BI_DC+
7
BI_DC-
8
Table 3-1:
Ethernet Port Mapping (Continued)
PICMG 2.16 Backplane
Port
CP-RIO6-923 Dual-
Slot Port Label
CP-RIO6-923 Single-
Slot Port Label
CP-RIO6-923-9
Single-Slot Port
Label