Kontron CP6003-SA - Manual (Page 21)

CP6003-SA Introduction
ID 1044-9757, Rev. 2.0 Page 1 - 3
P R E L I M I N A R Y
1. Introduction
1.1 Board Overview
The CP6003-SA (Standard Air-Cooled) is a highly integrated 6U CompactPCI system controller
board based on the 2
nd generation Intel® Core™ i7 and i5 processors combined with the mobile
Intel® QM67 Express chipset.
The board supports the 2 nd generation, quad-core Intel® Core™ i7-2715QE processor with
2.1 GHz, the 2 nd generation, dual-core, low-voltage Intel® Core™ i7-2655LE processor with
2.2 GHz, and the 2 nd generation, dual-core Intel® Core™ i5-2515E processor with 2.5 GHz.
All processors are built on 32-nm technology and provided in a BGA package.
Two SODIMM sockets are available on the CP6003-SA to provide up to 16 GB dual-channel,
third-generation Double Data Rate (DDR3) memory with Error Checking and Correction (ECC)
running at 1333 MHz. The graphics controller and the memory controller are integrated in the
processor. Furthermore, either one 2.5" HDD/SSD or up to 32 GB NAND flash memory (SSD)
via a SATA Flash module can be integrated into the CP6003-SA.
For maximum application flexibility, the CP6003-SA comes with an extensive range of inter-
faces such as up to five Gigabit Ethernet ports (three on front I/O and two on rear I/O in com-
pliance with PICMG 2.16), three high-resolution graphics interfaces (VGA, 2 x HDMI/DVI), two
COM ports (RS-232 on front and rear I/O, RS-422 on rear I/O), and six SATA interfaces with
RAID 0/1/5/10 functionality, one for the onboard SATA connector, one for the SATA Flash mod-
ule or the 2.5" HDD/SSD, and four for rear I/O. In addition, six USB 2.0 ports are available on
the board, two on front I/O and four on rear I/O.
Support for one PMC/XMC module ensures individual system expansion either via one 64-bit/
66 MHz PCI or 64-bit/133 MHz PCI-X PMC interface or via one XMC interface utilizing a x8
lane PCI Express 2.0 interconnection.
The board supports a configurable 64-bit/66 MHz PCI or PCI-X hot swap CompactPCI inter-
face. When installed in the system slot, the interface is enabled, and when installed in a periph-
eral slot, the CP6003-SA is isolated from the CompactPCI bus.
Safety and security features via a Trusted Platform Module (TPM) 1.2 are provided on request.
Intelligent Platform Management Interface (IPMI) is supported as well.
Designed for stability, the board fits into applications situated in industrial environments, includ-
ing I/O intensive applications where only one slot is available for the CPU, making it a perfect
core technology for long-life applications. Components with high temperature tolerance have
been selected from embedded technology programs, and therefore offer long-term availability.
The board is offered with various Board Support Packages including Windows, VxWorks and
Linux operating systems. For further information concerning the operating systems available for
the CP6003-SA, please contact Kontron.