Introduction cp6004-ra/-rc – Kontron CP6004-RC User Manual
Page 38
Introduction
CP6004-RA/-RC
Page 1 - 18
ID 1055-1509, Rev. 1.0
D R A F T — F O R I N T E R N A L U S E O N L Y
Software
uEFI BIOS
AMI Aptio®, AMI’s next-generation BIOS firmware based on the uEFI Specifi-
cation and the Intel Platform Innovation Framework for EFI.
•
LAN boot capability for diskless systems (standard PXE)
•
Automatic fail-safe recovery in case of a damaged image
•
Non-volatile storage of setting in the SPI flash (battery only required for
the RTC)
•
Compatibility Support Module (CSM) providing legacy BIOS compatibil-
ity based on AMIBIOS8
•
Command shell for diagnostics and configuration
•
uEFI Shell commands executable from mass storage device in a Pre-
OS environment (open interface)
•
IPMI support in the command shell
Software IPMI
IPMI firmware providing the following features:
•
The IPMI controller is accessible via up to two IPMBs, IOL and one KCS
interface with interrupt support
•
The IPMI firmware can be updated in field through all supported inter-
faces using the function “fwum...” of the open-source tool “ipmitool”. For
further information on the ipmitool refer to the sourceforge.net website.
•
Two IPMI controller flash banks with automatic roll-back capability in
case of an upgrade firmware failure
•
Board supervision and control extensions such as board reset, power
and SPI flash control, etc.
Operating Systems
The board is offered with various Board Support Packages including Windows,
VxWorks and Linux operating systems. For further information concerning the
operating systems available for the CP6004-RA/-RC, please contact Kontron.
Table 1-2:
CP6004-RA/-RC Main Specifications (Continued)
FEATURES
SPECIFICATIONS