Kontron ADD2-LVDS-DUAL-Internal - Manual (Page 10)

ADD2-LVDS
KTD-00711-D Public User Manual Date: 2008-09-16 Page 10 of 13
For KT965 motherboard in single - or dual LVDS display configuration.
The display connected to the J1 LVDS port can be activated from BIOS by selecting the [CRT+LFP] or [LFP]
and the display connected to the J2 LVDS card can not be activated from BIOS, only via Intel Graphics
Media Accelerator Driver. The driver for the display connected to J1 can be selected in BIOS. The driver for
the display connected to J2 can not be selected; it will use the same display driver as selected for the J1
connection.
In BIOS select:
Chipset > NorthBridge Chipset Configuration > Video Function Configuration >
Boot Type = [CRT+LFP] or [LFP] or [CRT]
SDVO = [select display type no.]
By selecting Secure CMOS (or OEM Failsafe) it is possible to prevent Windows from changing the BIOS
“Boot Type” setting. For Windows use the Intel Graphics Media Driver version 6.14.10.4859
(win2K_xp1431.exe) or newer. Clone mode is not supported in dual LVDS application.
For 986LCD-M motherboard in dual LVDS display configuration.
(For single LVDS display application use onboard LVDS port, no ADD2-LVDS card is required).
The display connected to the onboard LVDS port (the display 1 type) can be activated from BIOS by
selecting the [CRT+LFP] or [LFP] and the display connected to the ADD2-LVDS card (the display 2 type) can
not be activated from BIOS, only via Intel Graphics Media Accelerator Driver.
In BIOS select:
Chipset > NorthBridge Chipset Configuration > Video Function Configuration >
Boot Type = [CRT+LFP] or [LFP] or [CRT]
Backlight Signal Inversion = [Disabled] or [Enabled]
LCDVCC Voltage = [3.3V] or [5V]
LVDS = [select display 1 (LFP) type no.]
SDVO = [select display 2 type no.]
By selecting Secure CMOS (or OEM Failsafe) it is possible to prevent Windows from changing the BIOS
“Boot Type” setting. For Windows use the Intel Graphics Media Driver version 6.14.10.4859
(win2K_xp1431.exe) or newer. Clone mode is not supported in dual LVDS application.
Electrical Specification
Power consumption:
3.3V 3.5W/1.8W max. (Dual/Single and without possible 3.3V load for display.
Available 3.3V for display: 1A max. for each display
Available 5V for display: 1A max. for each display when PWR connected
Available 12V for display: 2.2A max. for each inverter (without PWR total for both inverters is 4A).
Operating temperature
: 0-60ºC