3 power supply – Kontron KTD-S0018-A User Manual
Page 14
Advertising
KTD-S0018-A Page
12
KAB-ADAPT-LVDStoTTL
Display Cable Guide
5.3
Power Supply
The adapter KAB-ADAPT-LVDStoTTL must be driven with +5.0V DC. The adaption to a panel voltage of 3.3V is
done on the adapter. The panel voltage can be set using solder jumpers.
5.3.1
Panel Power +3.3V
This is the default setting.
5.3.2
Panel Power +5.0V
Attention: Never set both solder jumper simultaneously! This can damage the adapter, the display and/or the SBC.
Advertising