COBY SNAPP CAM4505 - Manual (Page 12)

Page 12 Getting Started
En
gl
ish
If your memory card has a write protec-
tion switch, make sure that the switch is
set to the “Unlock” position.
Installing Batteries
The camcorder uses a rechargeable battery for
operation.
1. Remove the battery compartment cover by
sliding it down toward the base of the camera.
2. Load the included rechargeable battery into
the compartment. Make sure that the gold
contacts of the battery and compartment
touch each other. The text printed on the
battery should face up.
3. Replace the battery compartment cover and
slide it up into place.
The battery used in this device may
present a fire or chemical burn if mis-
treated. Do not connect improperly. Do
not dispose of in fire or expose to ex-
cess heat. Do not crush, puncture, or
incinerate. Do not short circuit external
contacts. Used batteries should be dis-
posed of safely. Keep batteries out of
the reach of children.
Turning the Camcorder On and
Off
To turn the camcorder on, press and hold .
The camcorder will automatically check to see if
a memory card has been loaded.
To turn the camcorder off, press .