COBY SNAPP CAM4505 - Manual (Page 41)

En
gl
ish
Connecting To A Tv Page 41
2. Turn the camera on. Connect the cable’s
mini plug to the A/V output jack located on
the bottom of the camcorder. The camcord-
er’s screen will turn off automatically.
3. Turn on the TV. Set the TV’s input source
mode to display the composite video signal.
When the TV source mode is set properly,
you will see the camcorder’s display on the
TV screen.
4. Press MODE on the camera to place it
Review mode. Use the review mode controls
to play videos or view photos on the TV.
Note: Please refer to the documentation pro-
vided with your TV If you need help setting its
input source mode.
The Video Out format of the camcorder
can be changed in the System Settings
menu. By default, the camcorder is set
to be used in North America (NTSC for-
mat, 60 Hz refresh rate).
For more information, please refer to the
section “Setting the System Options”.