Kontron AM4101 - Manual (Page 24)

Introduction AM4101
Page 1 - 8 ID 1022-5406, Rev. 1.0
P R E L I M I N A R Y
1.4.2 Front Panel
Figure 1-2: AM4101 Front Panel Versions
3
2
1
0
0
1
2
3
AM4101
A
B
0
1
2
3
AM4101
A
B
Mid-size Full-size
Module Management LEDs
• LED1 (red): Out-of-Service LED
• LED2 (red/green/amber): Health LED
• HS LED (blue): The hot swap indicator provides basic feedback to the
user on the hot swap state of the module. The HS LED
states are off, short blink, long blink, and on.
User-Specific LEDs
• ULED3 (red/green/amber): AMC Ethernet port A link signal status or POST code LED
• ULED2 (red/green/amber): AMC Ethernet port B link signal status or POST code LED
• ULED1 (red/green/amber): Freely configurable or POST code LED
• ULED0 (red/green/amber): Freely configurable or POST code LED
Connectors
• Serial Connector
• Gigabit Ethernet Connector
For further information on the LEDs used on the AM4101, refer to section 2.3.1, “Front Panel
LEDs”.