5 technical specification, Technical specification - 10, Introduction am5020 – Kontron AM5020 User Manual

Page 28

Advertising
background image

Introduction

AM5020

Page 1 - 10

ID 1043-6198, Rev. 1.0

P R E L I M I N A R Y

1.5

Technical Specification

Table 1-2:

AM5020 Main Specifications

AM5020

SPECIFICATIONS

Processor and Memory

CPU

The AM5020 supports the following microprocessors:

Intel® Core™ i7-610E (SV) processor with ECC, 2.53 GHz, 4 MB L3 cache

Intel® Core™ i7-620LE (LV) processor with ECC, 2.0 GHz, 4 MB L3 cache

Further processor features:

Two execution cores

Intel® Hyper-Threading Technology (Intel® HT Technology)

Intel® 64 Architecture

Intel® Turbo Boost Technology

Intel® Intelligent Power Sharing (IPS)

System Memory interface with optimized support for dual-channel
DDR3 SDRAM memory with ECC at 1066 MHz

Integrated 2D and 3D Graphics Engines

DMI and FDI interfaces to the Intel® QM57 chipset

One x16 PCI Express 2.0 port operating at 2.5 GT/s

Please contact Kontron for further information concerning the suitability of
other Intel processors for use with the AM5020.

Memory

Main Memory:

Up to 8 GB, dual-channel DDR3 SDRAM memory with ECC running at
1066 MHz

Cache Structure:

64 kB L1 cache for each core

32 kB instruction cache

32 kB data cache

256 kB L2 shared instruction/data cache for each core

4 MB L3 shared instruction/data cache shared between both cores

Flash Memory:

Two redundant SPI flash chips (2 x 8 MB) for uEFI BIOS controlled by
the MMC

Mass Storage Device:

Up to 32 GB NAND flash via an onboard SATA Flash module

Serial EEPROM with 64 kbit

Chi

ps

et

Intel® QM57

Mobile Intel® QM57 Express Chipset:

Two x4 or eight x1 PCI Express 2.0 ports operating at 2.5 GT/s

SATA host controller with six ports, 3 Gbit/s data transfer rate and
RAID 0/1/5/10 support

USB 2.0 host interface with up to 14 USB ports available (only two ports
are used on the AM5020)

SPI flash interface support

Low Pin Count (LPC) interface

PCI interface, 32-bit/33 MHz (not used on the AM5020)

Power management logic support

Enhanced DMA controller, interrupt controller, and timer functions

System Management Bus (SMBus) compatible with most I²C™ devices

DMI and FDI interfaces to the processor

High Definition Audio Interface (not used on the AM5020)

Analog display port (not used on the AM5020)

Three digital display ports (only one port is used on the AM5020)

Integrated RTC

Advertising