Connector descriptions – top, Crt interface – x50, 2 connector descriptions – top – Kontron MSM-LP Manual User Guide V106 User Manual
Page 14: 1 crt interface – x50
Advertising
MSM-LP / MSM-LP Connectors & Jumpers
www.kontron.com
10
3.2 Connector Descriptions – Top
Warning: On system boards the pin out is mirrored due to assembling of connectors on bottom side!
The description is applicable on view from top, if system pin headers are viewed from bottom; even and odd pin
numbers must be swapped 1<->2, 3<->4, 5<->6, 7<->8, 9<->10, 11<->12, 13<->14, 15<->16.
3.2.1 CRT Interface – X50
The board provides an onboard analogue CRT interface.
Header
Pin
Signal Name
Function
2.54mm grid
1
GND
Ground
2
RED
Red video signal
3
NC
Not connected
4
GREEN
Green video signal
5
NC
Not connected
6
BLUE
Blue video signal
7
CRT_DDATA
DDC data
8
CRT_HSYNC
Horizontal sync
9
CRT_VSYNC
Vertical sync
10
CRT_DCLK
DDC clock
Advertising