Kontron XMC402 - Manual (Page 15)

XMC402 Introduction
ID 1053-5395, Rev. 1.0 Page 1 - 5
1.3 Technical Specification
Table 1-1: XMC402 Main Specifications
XMC402 SPECIFICATIONS
Controller
Intel® X540 Intel® X540 10 Gigabit Ethernet controller with PCI Express 2.1 interface
and two 10 Gigabit Ethernet ports
Mem
ory
Flash 16 Mbit of flash memory for configuration and additional data storage
FRU EEPROM 2 kbit EEPROM for IPMI serial EEPROM FRU data storage
Connectors
10 Gigabit Ethernet Two front panel RJ-45 connectors with integrated magnetics and status
LEDs
XMC One onboard XMC connector supporting PCI Express 2.1 (5 GT/s) with x8
lanes for connection to a carrier board
LEDs
Ethernet Status LEDs Integral Ethernet LEDs:
• ACT / LNK (green): Ethernet Activity / Link
• SPEED (green / amber / off): Ethernet Speed
Softwa
re Operating Systems There are various operating systems available for the XMC402.
For information relating to the supported operating systems, please refer to
the Kontron web site or contact Kontron.
General
Mechanical XMC-compliant form factor
Power Consumption See Chapter 5 for details.
Temperature Range Operational: 0°C to +60°C
Storage: -40°C to +85°C
Recommended Airflow Volumetric Flow Rate: > 20 cfm
Sufficient airflow must be provided to ensure optimal operation and long-
term reliability of the XMC402. For further information, refer to the carrier’s
user guide.
Climatic Humidity 93% RH at 40°C, non-condensing (acc. to IEC 60068-2-78)
Dimensions 74 mm x 149 mm single-height XMC card
Board Weight 116 grams