Kontron COMe-bPC2 - Manual (Page 78)

COMe-bPC2 / BIOS Operation
IDE Configuration
Feature Option Description
SATA #1 Configurationer Disabled
Enabled Enables or disables the SATA interface.
Configure SATA#1 as IDE Compatible
RAID
AHCI
IDE Enhanced
Selects the mode for SATA#1 controller
SATA#2 Configuration Disabled
Enhanced
Controls the mode for the 2nd SATA controller in ICH-9
Hard Disk Write Protect Disabled
Enabled
Disables/enables device write protection. It will be
effective only if device is accessed through BIOS
functions.
IDE Detect Time Out (Sec.) [0-35] 1 Selects the time out value for the detection of ATA/
ATAPI devices
ATA(PI) 80Pin Cable Detection Host & Device
Host
Device
Selects the mechanism for detecting 80Pin ATA(PI)
cables.
78