Kontron ETX-LX - Manual (Page 63)

12 Appendix D: ETX® Connector Pinouts
Kontron User's Guide ETX®-LX 63
12.7 Serial ATA connectors
The two Serial ATA connectors onboard the ETX®-LX module are 7-pin "L" type.
Pin Signal Pin Signal
1 GND 2 SATA_TXP
3 SATA_TXN 4 GND
5 SATA_RXN 6 SATA_RXP
7 GND
Note: The SATA controller VIA VT6421 (SATA Ports and Onboard Compact Flash) is only supported with Linux Kernel
2.6.18 or later and Windows XP/2k with installed device driver. Please refer to the ETX®-LX download section on
the Kontron web page for the latest Windows driver revision.
Both connectors are located within the area which is specified in the ETX® Component SBC™
Specification Document Revision 3.x.
side view
(connectors only)
top view
(connectors only)
Serial ATA 1
Serial ATA 2