Kontron CP3-BP4-M - Manual (Page 8)

PD02: CP3-BP4-M CPCI Backplane
Page 8 © 2002 PEP Modular Computers GmbH RID 24229 PD02, Rev. 01
5.3 Auxiliary Signal Connectors
The connection of the auxiliary signals is accomplished via two 5-contact, 2.54 mm pin-row,
male connectors, JP1 and JP2, which can be soldered or wrapped or be used with appropri-
ate connectors.
Figure 4: Orientation and Pinouts of CP3-BP4-M Connectors JP1 and JP2
5 4 3 2 1
JP2
5 4 3 2 1
JP1
Legend:
1
Also sense for power supply;
Table 4: Pinouts of CP3-BP4-M
Connectors JP1 and JP2
Pin Function
JP1
1 GND 1
2 +5V 1
3 FAL#
4 DEG#
5 PRST#
JP2
1 EN#
2 GND
3 INH#
4 GND
5 N/C 2
2 N/C = not connected.