Kontron KISS 2U PCI 762 - Manual (Page 73)

15. Configuring SATA for RAID PCI 762 – User’s Guide (Version 1.0)
(5) Installing the SATA controller driver during the OS installation
Now, the SATA driver disk is ready, and BIOS settings configured, you can proceed to install Windows 2000/XP onto your
SATA hard drive using the SATA driver. Here is an example for Windows XP installation.
(5)-1 Restart your system to boot the Windows 2000/XP Setup disk, and press F6 button as soon as you see the
message "Press F6 if you need to install a 3rd party SCSI or RAID driver". After pressing the F6 button, there
will be a few moments for some files being loaded before next screen appears.
(5)-2 When you see the screen below, insert the floppy disk containing the SATA driver and press “S”.
www.kontron.com 71