Installation, 1 general, Installation - 3 – Kontron OM6062 User Manual

Page 41: 1 general - 3, Om6062r base solution configuration - 3, Om6062r installation

Advertising
background image

OM6062R

Installation

ID: 1031-6374, Rev. 1.0

Page 3 - 3

3.

Installation

3.1

General

The OM6062R shelf itself is an application support platform for MicroTCA™ solutions. In order
to satisfy solution requirements it must be configured accordingly. To assist application devel-
opers and system implementers in achieving their goals, the OM6062R is provided with a min-
imum configuration.

The following table and figures illustrate the base solution configuration of the OM6062R. This
configuration is the basis for the information and procedures provided in the following Installa-
tion sections.

Legend for Table 3-1:

FSA = front slot area, as seen from front - numbered left to right
u - l = upper - lower - area of slot occupied by component
QTY = quantity

Table 3-1: OM6062R Base Solution Configuration

COMPONENT

QTY

SYSTEM LOCATION - DESCRIPTION

Subrack

1

Mechanical chassis of OM6062R

Backplane

1

-

Power Supply Unit (PSU)

1

FSA-1 : u - l : Double 6HP, screw fixed

Fans

1

Fan bay area (four small sized fans)

Filler Panels, Single Width
(OPTIONAL)

-

FSA-2 : u - : Full-size with air flow guide and extraction handle
FSA-3 : u - : Mid-size with air flow guide and extraction handle
FSA-4 : u - : Mid-size with air flow guide and extraction handle
FSA-5 : u - : Mid-size with air flow guide and extraction handle
FSA-6 : u - : Mid-size with air flow guide and extraction handle
FSA-7 : u - : Mid-size with air flow guide and extraction handle
FSA-8 : u - : Mid-size with air flow guide and extraction handle

Filler Panels, Double Width
(OPTIONAL)

-

FSA-4 : u - l : Mid-size with side panel, air baffle, and screw retention device
FSA-5 : u - l : Mid-size with side panel, air baffle, and screw retention device
FSA-6 : u - l : Mid-size with side panel, air baffle, and screw retention device
FSA-7 : u - l : Mid-size with side panel, air baffle, and screw retention device
FSA-8 : u - l : Mid-size with side panel, air baffle, and screw retention device

Splitter Kit
(includes card guide
support plate, strut, and
card guide)

(OPTIONAL)

-

FSA-2 : u - l : Double, on right side of slot
FSA-3 : u - l : Double, on right side of slot
FSA-4 : u - l : Double, on right side of slot
FSA-5 : u - l : Double, on right side of slot
FSA-6 : u - l : Double, on right side of slot
FSA-7 : u - l : Double, on right side of slot
FSA-8 : u - l : Double, on right side of slot

AM5901 MCH

1

FSA-2 : u - l : Double Full-size (Kontron module)

Advertising