Kontron NSN2U IP Network Server User Manual
Page 34
33
5.
Pull the lever and open the load plate all the way. (Figure 18, “A”)
Figure 18.Opening the Load Plate
6. Remove the processor.
Installing a New Processor
NOTE: Follow the ESD precautions covered in “ESD and Processor Handling Precautions
.
To install a processor, follow these instructions:
1. Take the processor out of its packaging and remove the protective shipping cover.
(Figure 19, “A”)
Figure 19. Removing the Shipping Cover
CAUTION: The underside of the processor has components that may damage the socket pins
if installed improperly. The processor must align correctly with the socket
opening before installation. Gently place the processor onto the socket surface.
Do not drop the processor into the socket!
1. Remove the socket protective cover by grasping the cover tab and pulling it away
from the load plate. Store the protective cover for future use. (Figure 20, “A”)
Figure 20. Removing the Socket Protective Cover