Krampouz Multi Contact Grill - Manual (Page 13)

- 13 -
§ Do not put the appliance nor its cable on or near a hot surface (electric hotplate, hot gas burner,
heated oven etc).
§ Disconnect the plug when the appliance is not in use or before cleaning.
§ The appliance must not be cleaned with a high or low pressure jet.
§ Do not handle the appliance while hot.
§ Do not touch the hot surfaces.
§ Leave the appliance to cool prior to handling or cleaning it.
§ This device is prohibited outside.
§ Place the appliance on a dry and stable surface, and slightly back from the edge and at least 20
cm from any wall or element liable to be affected by heat.
§ Take care: Do not insert a sheet of tin foil or any other material or object (risk of damage)
between the plate and the frame (ventilation area).
§ Do not block the ventilation holes of the plastic base, under the frame.
§ Do not block the ventilation area.
§ Caution: Do not use this device with wood or coal to other energy source than that for which it
provides (electrical energy).
§ We recommend you keep the original packaging in order to store the appliance.
KEEP THESE INSTRUCTIONS
Technical description
The electric Multi Contact Grills ‘Easy Clean’ are easy and comfortable to use thanks to their thermostat
adjustable to temperatures up to 300°C. They are fitted with cast iron plates. These contain shielded
heating elements which spread the heat evenly so that perfectly cooking can be reached.
.
§ Stainless steel frame
§ Plates made of cast iron certified for use with foodstuffs
§ Removable collecting vat
§ Thermostat with knob adjustable from 50 to 300°C
§ Heating indicator
§ On/Off switch
§ Indicator light
§ Single phase 240 Volt power supply
§ Power cable for 16 amp socket
Installation
Work surface
Choose an easy-to-clean work surface on which to install the appliance. The appliance must be at
least 20 cm from any vertical surfaces that are not heat-resistant in order to prevent damage by heat
radiating from the plates. To ensure maximum ease of use, the top of the plates should be between 85
and 95 cm from the ground.