Casio E-200 - Manual (Page 56)

56
To create an Ethernet connection to a network:
1. You do not need to create a new connection on your Pocket PC. Instead, you must purchase
and configure an Ethernet card that is compatible with your Pocket PC.
2. Get the following information from your network administrator: user name, password, and
domain name.
3. Insert the Ethernet card into your device. For instructions on inserting and using the Ethernet
card, see the owner’s manual for the card.
4. The first time you insert the card, Network Settings will appear automatically so that you can
configure the Ethernet card. Most networks use DHCP, so you should not have to change these
settings unless your network administrator instructs you to do so. Tap OK. (If it does not
appear or to change settings later, tap
and then Settings. On the Connections tab, tap
Network, tap the adapter you want to change, and then tap Properties.)
5. Connect the Ethernet card to the network by using a network cable. For information, see your
owner’s manual.
6. Tap , Settings, Connections tab, and then Connections. From the My network card
connects to list, select Work.
7. If you want to synchronize your device, tap , and then ActiveSync. In the Tools menu, tap
Options. In the PC tab, select Include PC when synchronizing remotely and connect to, and
select your computer’s name. Remote synchronization with a desktop computer will work only
if you have set up a partnership with that computer through ActiveSync and have set
ActiveSync to allow remote connections. Other restrictions apply. For more information on
synchronizing remotely, see ActiveSync Help on the desktop computer.
To start the connection, simply start using one of the programs listed in the preceding section.
Once connected, you can perform the same activities as listed in the preceding section.
End a Connection
To disconnect, do one of the following:
• When connected via dial-up or VPN, tap the Connection icon,
, on your navigation bar, and
then tap End.
• When connected via cable or cradle, detach your Pocket PC from the cable or cradle.
• When connected via Infrared, move the Pocket PC away from the PC.
• When connected via a network (Ethernet) card, remove the card from your Pocket PC.
Connect Directly to an E-mail Server
You can set up a connection to an e-mail server so that you can send and receive e-mail messages
by using a modem or network connection and Inbox on your Pocket PC.
The ISP or network must use a POP3 or IMAP4 e-mail server and an SMTP gateway.
You can use multiple e-mail services to receive your messages. For each e-mail service you intend
to use, first set up and name the e-mail service. If you use the same service to connect to different
mailboxes, set up and name each mailbox connection.