Curtis VR245 - Manual (Page 8)

7
2. Basic operation
2.1 Install battery
Press / slide down the Battery Cover and insert lithium battery. Align with correct polarity of
battery terminals. Close the Battery Cover.
2.2 Charge Battery
1. Power off the camera.
2. Connect the camera to the computer USB port or the power adapter (not include) with
USB cable to charge the battery.
3. During charging, Busy light is on and will be off when the battery is fully charged.
2.3 Use SD/MMC/SDHC card
Insert the SD Memory card into the SD/MCC/SDHC Card Slot. Push it down until the card
stays latched. Do not force – check card’s position according to the position mark on the