Canon 510 HS - Manual (Page 16)

Initial Preparations
16
Before use, charge the battery with the included charger. Be sure to charge
the battery initially, because the camera is not sold with the battery charged.
Remove the cover.
Insert the battery.
z After aligning the S marks on the battery and
charger, insert the battery by pushing it in
(
) and down ( ).
Charge the battery.
z For CB-2LB/CB-2LD: Flip out the plug ( )
and plug the charger into a power outlet ( ).
z For CB-2LBE/CB-2LDE: Plug the power
cord into the charger, then plug the other end
into a power outlet.
X The charging lamp turns orange and
charging begins.
X When the charging is finished, the lamp turns
green.
Charging the Battery
IXUS 510 HS
IXUS 240 HS
CB-2LB
CB-2LBE
IXUS 510 HS