Losi LOSB9625 - Manual

Losi® (LOSB9625)
Intelligent LiPo Balancer for 2-6 Cell LiPo Batteries
Specifications:
o
Balances 2S to 6S LiPo batteries
o
Balances discharge current of 300mA
o
Voltage tolerance for cells is (+/-) 0.02V
Operational Process:
1. Read all safety precautions prior to use.
2. You can use the Intelligent Balancer when using a non-balance charger. It is
very good to perform maintenance balancing after each use.
Note: The Intelligent Balancer will NOT always fully balance a LiPo
battery during the time of a non-balance charge. If a battery is
significantly out of balance, it may take 24 hours or more to rebalance a
battery.
3. Select the appropriate adapter for your LiPo balance lead. (See adapter chart)
4. See picture below
5. Connect the wire harness to the Intelligent Balancer.
Note: Label is marked with Positive (+) and Negative (-). The black
wire should be aligned and connected to the right as below.