Manhattan LCD HD089C2 - Manual (Page 6)

6
© 2011 Manhattan LCD LLC. - All Rights Reserved
These monitors are equipped with 4 external inputs; VGA, Component, Composite, and HDMI port.
The HD089B model has a second HDMI port which is only accessible from inside the monitor there is
no external connector. Each input has its own set of menu items and are stored separately from each
other adjusting an input will have no effect on another.
Picture Tab:
The adjustments you can make in the Picture Tab of the menu system are:
Preset: Allows the user to make Preset color tables for different cameras
Brightness: Adjusts the amount of white in the picture.
Contrast: Adjusts the contrast between the colors.
Phase: Modifies the Clock/ Phase of the input (VGA & Component only)
Frequency: Changes the frequency at which the panel is running (VGA only).
Sharpness: Adjusts the sharpness filter allowing you to go for a sharp look or smooth look.
Color: Allows you to adjust the Color Saturation level.
Tint: Allows you to adjust the Hue of the image.
Gamma: Allows you to set the monitor to a predefined gamma table.
Color Temp: Allows you to adjust the Red, Green and Blue channel gains individually.
Img.Adj Tab:
The image Adjust tab will allow the user to adjust the images position and aspect ratio on the
monitor.
Image Size: Adjusts aspect ratio. Fill All, 1:1, Fill Aspect, 4:3, 16:10, 15:9, 16:9, 1.85:1, 2.35:1, Red
Camera, & Canon 7D, HDSLR Record, HDSLR Playback, Zoom 1, 2, 3 & 4.
H position: Horizontal position of the picture.
V position: Vertical position of the picture.
Overscan: allows the operator to zoom in or out on a
specific image.
Auto: Auto centers the position the picture on the screen.
Freeze Frame: Freezes a specific image on the screen.
Setup Tab:
The setup tab allows the user to customize Picture in Picture as well as OSD settings.
Hotkey Assignments: Allows you to set each “Hotkey” button on keypad to a menu function.
Picture in Picture: You can select 1 Digital & 1 Analog input and display them Side By Side.
Transparency: Sets how visible the background of the OSD menu system.
OSD Timeout: sets the length of time for the OSD to be displayed after the last keystroke.
Sleep Timer: Sets how long the monitor will stay on with no video input.
Source Enable: Enables or disables video Inputs.
Factory Reset: Resets all user adjustments to factory defaults.
Advanced Tab:
Blue Gun: Turns off red & green channels for use when calibrating monitor.
False Color: Displays colors representing different IRE Levels (helps with setting correct exposure)