Manhattan LCD HD089B&C Version 1 User Manual
Page 12
12
© 2011 Manhattan LCD LLC. - All Rights Reserved
Section: Power Options:
HD089B model monitors may use any 12V regulated power source. All monitors ship with a
supplied 12V regulated AC adapter. The input connector is a standard 2.1x5.5mm barrel connector
the center pin being + positive outer shell is - negative. You may use any power source as long as
it is regulated. If the polarity is reversed it will void your warranty, if you overpower the monitor
with a higher voltage than 12.5 volts it will blow a fuse and void the warranty.
We currently offer optional battery packs with Velcro strips for mounting & battery plates for
Panasonic Cannon & Sony Batteries that include a
built in power regulator to ensure proper operation.
The Battery plates are mounted to the monitor at
the factory and are mounted in a sideways position
to allow the monitor to be flipped upside-down on
cameras with 35mm lens adapters. Note the green
status indicator it will turn on when the battery is
charged and flash when the battery is low. The
power wire connects to the 12V dc jack when the
monitor is being powered by the plate.