Manhattan LCD HD089B - Manual (Page 8)

8
© 2009 Imägo Metrics LLC for Manhattan LCD Inc. - All Rights Reserved
Section: Advanced Monitor Adjustments
From this point you can adjust many things including calibration table greyscale correction, 2D
peaking filter 3D gamma table, Sensitivity to different film modes such as 2:2 3:2 pull down Noise
filters, gamma tables & horizontal deblocking.
***NOTE*** If you are Not Sure what a setting does do not mess with it you may screw up the
monitor.
Quick Access Menu:
Now that the PWx90 menu is visable you can Use the Quick Menu by pressing the red button on the
bottom row of buttons on the remote. Once pressed you will get a single line menu system in the
lower right corner of the screen.
See picture. To navigate this menu
use the Up & Down arrows to scroll
through the menu and the Left
arrow to select a field or sub‐ menu
use the RECALL button under the
number 9 to go up a level.
Quick Access Menu Options:
Root Menu: Brightness, Contrast, Sharpness & Image size.
Picture Menu: Color Saturation, Tint (Hue), H Position ADC, V Position ADC, 7.5 IRE Setup, Phase,
Gamma Select & Horizontal De‐blocking.
Tweaking Menu: This sub‐menu will allow you to change any of the following options.
Show Motion Level, Manual XC/XL, VEH CONTROL, Sync Monitor, H Filter, V Filter, Cuec/ICP, FRMEC,
Film Mode 3:2, SP Noise, Luma Noise, Chroma Noise, UV5 Blue, UV5 Green, UV5 Fleshtone, UV5 Red,
UV5 Yellow, DLTI Gain, DCTI Gain, DLTI Frequency, DCTI Frequency, Coring Level, Peaking Gain, LAI,
Gamma Select, Horizontal De‐blocking & Indicate Film Mode.
BWE Menu: BWE Enable, BW Gain, BW Offset, BWE Mid Gain, BWe Mid Offset, BWE Time.
2D Peaking Menu: Peaking filters increase the gain for higher frequencies, resulting in steeper
transitions and higher local contrast. 2D Peaking filter options High Pass, Low Pass, Band Pass, Un‐
sharp, 2D Peaking Gain, 2D Peak Limiting, 2D Peak Coring.
3d Ctrl Menu: Modifies advanced 3d color mapping technology. 3D Comb settings HW 3D, SW
Adaptive 3D, Off, 3D Speed fast to slow,
3d Adv Ctrl Menu: Adjusts the 3D Comb noise filters. Min Noise 3D Adaptive 3D LM Min. Noise,
Adaptive 3D MM Min. Noise, Adaptive 3D HM Min. Noise.