Mediasonic MLG-7117CVR - Manual (Page 6)

-5-
Video mode options
Resolution: full HD 1080P 30fps / HD 720P 30fps / WVGA: 640*480P
Cycling videos: Off / 2 minutes / 3 minutes / 5 minutes
WDR: On / Off
Exposure compensation: -2--+2
Motion detection: On / Off
Video audio: On / Off
Date: On / Off
G-SENSOR: Off / low / medium / high
System Setup options
Date: 2013/8/27
At 12:00:00
YY/MM/DD
Automatic shutdown: Off / 3 / 5 / 10 minutes
Button sound: On / Off
Language Options: English / French / Spanish/ Italian/ Portuguese /
German / Russian / Chinese Simplified / Chinese Traditional
TV mode: PAL / NTSC
Source frequency: 50HZ/60HZ
LED Light: On / Off
Backlight: Off /1 min /3 min / 5 min
Format: memory card
Default: yes/no
Playback options
Delete current / delete all
Protect current / unlock all current / lock or unlock all
Slideshow: 2S, 5S, 8S
Image pixel options:
12M/10M/8M/5M/3M/2M/1.3M
USB:
Connect MLG-7117CVR by usb to view and copy files out. You can also
remote the Micro SD card and put into a card reader to view and copy
files out.
-6-
Function setting
Image resolution Settings
1. Turn on MLG-7117CVR, it goes standby mode automatically. Press the
“menu” button to Access image setting
2. Select the image resolution, press the “Left” and “right” button to scroll
up and down
Opening and closing video
In video mode or standby mode, press "down" button, to open or close video
Playback mode
Turn on MLG-7117CVR, it goes standby mode automatically. Click twice
on "mode" button to enter the playback screen, press “left” and “right”
button to select file for playback, press the mode button to return the
recording standby mode.
Language Settings
Turn on MLG-7117CVR, it goes standby mode automatically, click the
“menu “button to enter language option menu, press “left” and “right”
button to select preferred language, Press “OK” button to confirm selection
Time and date settings
To set the current time and date in standby mode, press the “menu” button,
find the time option, press “left” or “right” button to set the time and date,
after setting the time and date, press the “OK” button to confirm the setting.