Driving and parking, Driving systems – Mercedes-Benz GLK-Class 2015 Owners Manual User Manual

Page 202

Advertising
background image

X

Make sure that the SmartKey is in position

2 in the ignition lock.

X

Make sure that the

Activation by R

Activation by R

gear

gear

setting is active in COMAND, see the

separate COMAND operating instructions.

X

To show the 360° camera image: engage

reverse gear.

The COMAND display shows the area

behind the vehicle in split screen:

R

vehicle with guide lines

R

top view of the vehicle

Selecting the split-screen and full

screen displays

X

To switch between split screen views:

switch to the line with the vehicle icons by

sliding ZV the COMAND controller.

X

Turn cVd the COMAND controller and

select one of the vehicle symbols.

X

To switch to full screen mode: select

Full Screen

Full Screen

by turning cVd the

COMAND controller and press W to con-

firm.

Displays in the COMAND display

Important safety notes

!

Objects not at ground level may appear to

be further away than they actually are, e.g.:

R

the bumper of a parked vehicle

R

the drawbar of a trailer

R

the ball coupling of a trailer tow hitch

R

the rear section of an HGV

R

a slanted post

Use the guidelines only for orientation.

Approach objects no further than the bot-

tom-most guideline.

Top view with picture from the rear view

camera

:

Symbol for the split screen setting with

top view and rear view camera image

;

Yellow guide line at a distance of approx-

imately 13 ft (4.0 m) from the rear of the

vehicle

=

Yellow guide line for the vehicle width

including the exterior mirrors, for current

steering wheel angle (dynamic)

?

Yellow lane marking tires at current steer-

ing wheel angle (dynamic)

A

Yellow guide line at a distance of approx-

imately 3 ft (1.0 m) from the rear of the

vehicle

B

Vehicle center axle (marker assistance)

C

Red guide line at a distance of approx-

imately 12 in (0.30 m) from the rear of the

vehicle

D

Bumper

The guide lines are shown when the trans-

mission is in position R.
The distance specifications only apply to

objects that are at ground level.

200

Driving systems

Driving

and

parking

Advertising