Navig atio n, Route guidance – Mercedes-Benz S-Sedan 2015 COMAND Manual User Manual
Page 103
Recording the route
General notes
When recording the route, bear in mind the
following:
R
if the SD memory card is inserted, it must
not removed during recording.
R
if route recording is started manually, it
must be finished manually before COMAND
is switched off (e.g. when the engine is
switched off).
R
COMAND minimizes the number of route
points recorded. Therefore when the
recorded route is subsequently com-
menced, it may differ from the route that
was originally recorded.
Starting/finishing route recording
X
Insert the SD memory card (
Y
page 215).
X
To switch to navigation mode: press the
ß button.
X
To show the menu: slide 6 the control-
ler.
X
To select
Destination
Destination
: turn and press the
controller.
X
Select
From Memory Card
From Memory Card
.
X
Select
Start Route Recording
Start Route Recording
.
The route is recorded and REC appears at
the bottom edge of the screen.
X
To stop recording, select
End Route
End Route
Recording
Recording
from the menu.
The route is stored under
Personal
Personal
Routes
Routes
.
Displaying/editing the recorded route
X
Insert the SD memory card (
Y
page 215).
X
To switch to navigation mode: press the
ß button.
X
To show the menu: slide 6 the control-
ler.
X
To select
Destination
Destination
: turn and press the
controller.
X
Select
From Memory Card
From Memory Card
.
X
Select
Personal Routes
Personal Routes
.
Previously recorded routes are displayed.
X
To select Route: turn and press the con-
troller.
The map appears with a menu. The
recorded route is shown on the map in blue.
Starting route calculation
X
Select
Start
Start
.
Changing the name and symbol
X
Select
Edit
Edit
.
X
Select
Change Name
Change Name
or
Edit Icon
Edit Icon
.
X
To change the name: enter characters
(
Y
page 36).
X
To change symbol: select a symbol.
The symbol is saved.
Route guidance
General notes
For this reason, you must always observe
road and traffic rules and regulations during
your journey. Road and traffic rules and reg-
ulations always have priority over system
driving recommendations.
COMAND calculates the route to the destina-
tion without taking account of the following,
for example:
R
traffic lights
R
stop and yield signs
R
merging lanes
R
parking or stopping in a no parking/no
stopping zone
R
other road and traffic rules and regulations
R
narrow bridges
COMAND may give differing navigation com-
mands if the actual street/traffic situation
does not correspond with the digital map's
data. For example, if the road layout or the
direction of a one-way street has been
changed.
For this reason, you must always observe
road and traffic rules and regulations during
Route guidance
101
Navig
atio
n
Z