System settings, Reset function – Mercedes-Benz CL-Class 2014 COMAND Manual User Manual
Page 49
Importing/exporting data
X
Insert the SD memory card (
Y
page 197).
or
X
Connect a USB device (e.g. a USB memory
stick) (
Y
page 197).
X
Press W.
The system menu appears.
X
Select
Settings
by turning cVd the
COMAND controller and press W to
confirm.
X
Select
Import/Export Data
and press
W to confirm.
X
Select
Import Data
or
Export Data
and
press W to confirm.
If PIN protection is activated, a PIN prompt
appears when you select
Export Data
.
X
Enter the PIN, select¬and press W to
confirm.
You can now proceed in the same way as if
PIN protection was deactivated.
X
To select a preset: select
Memory Card
or
USB Storage
and press W to confirm.
X
Select
All Data
and press W to confirm.
This function exports all the data to the
selected disc.
or
X
Select the data type and press W to
confirm.
Depending on the previous entry, select the
data type for the export O or not ª.
X
Select
Cont.
and press W to confirm.
i
Personal music files in the MUSIC
REGISTER cannot be saved and imported
again using this function.
Reset function
You can completely reset COMAND to the
factory settings. Amongst other things, this
will delete all personal COMAND data. This
includes the station presets, entries in the
destination memory and in the list of previous
destinations in the navigation system and
address book entries. In addition, any
activated PIN protection, which you have
used to protect your data against unwanted
export, will be deactivated. Resetting is
Reset function
47
System
settings