At a gla nce, Basic functions of audio20 – Mercedes-Benz CLA-Class 2014 Audio 20 Manual User Manual
Page 25
X
To select a setting: slide Z V Æ or turn
c V d the controller.
X
To save a setting: press W the controller.
The setting is stored and you exit the menu.
i
The balance setting is automatically reset
to the default value (0) when Logic 7
®
is
switched on or off.
i
Please bear the following in mind:
R
To provide the optimum audio experi-
ence for all passengers when Logic 7
®
is
switched on, the balance should be set
to the center of the passenger compart-
ment.
R
MP3 tracks should have a bit rate of at
least 128 kbit/s.
R
Surround-sound playback does not func-
tion for mono signal sources, such as the
medium wave range (MW) in radio mode.
R
If radio reception is poor, e.g. in a tunnel,
you should switch off Logic 7
®
. Other-
wise, it may switch between stereo and
mono and cause temporary sound dis-
tortions.
R
On some stereo recordings, the sound
characteristics may differ from conven-
tional stereo playback.
Basic functions of Audio20
23
At
a
gla
nce