Driving and parking, Driving – Mercedes-Benz E-Cab 2014 Owners Manual User Manual

Page 167

Advertising
background image

G

WARNING

If the parking brake has not been fully

released when driving, the parking brake can:

R

overheat and cause a fire

R

lose its hold function.

There is a risk of fire and an accident. Release

the parking brake fully before driving off.

!

Warm up the engine quickly. Do not use

the engine's full performance until it has

reached operating temperature.
Only shift the automatic transmission to

the desired drive position when the vehicle

is stationary.
Where possible, avoid spinning the drive

wheels when pulling away on slippery

roads. You could otherwise damage the

drive train.

Key positions

SmartKey

g

To remove the SmartKey
(shift the transmission to position P)

1

Power supply for some consumers, such

as the windshield wipers

2

Ignition (power supply for all consumers)

and drive position

3

To start the engine

i

The SmartKey can be turned in the

ignition lock even if it is not the correct

SmartKey for the vehicle. The ignition is not

switched on. The engine cannot be started.

KEYLESS-GO

General notes

R

Do not store the KEYLESS-GO key together

with:

-

electronic devices, e.g. a mobile phone

or another SmartKey

-

metallic objects, e.g. coins or metal film

R

Do not keep the KEYLESS-GO key in metal

objects, e.g. metal cases.
This can affect the functionality of

KEYLESS-GO.

Vehicles with KEYLESS-GO are equipped with

SmartKeys featuring the integrated KEYLESS-

GO function and a detachable Start/Stop

button.
The Start/Stop button must be inserted in the

ignition lock and the SmartKey must be in the

vehicle.
Pressing the Start/Stop button several times

in succession corresponds to the different

SmartKey positions in the ignition lock. This

is only the case if you are not depressing the

brake pedal.
If you depress the brake pedal and press the

Start/Stop button, the engine starts

immediately.
The Start/Stop button can be removed from

the ignition lock. Then, you can insert the

SmartKey into the ignition lock.

i

You do not have to remove the Start/Stop

button from the ignition lock when you

leave the vehicle. You should, however,

always take the SmartKey with you when

leaving the vehicle. As long as the

SmartKey is in the vehicle:

R

the vehicle can be started using the

Start/Stop button and

R

electrically powered equipment can be

operated.

Driving

165

Driving

and

parking

Z

Advertising
This manual is related to the following products: