Safety, Driving safety systems – Mercedes-Benz C-Coupe 2014 Owners Manual User Manual
Page 70
Brake cannot prevent a collision without your
intervention.
Important safety notes
G
WARNING
PRE-SAFE
®
Brake will initially brake your
vehicle by a partial application of the brakes
if a danger of collision is detected. There may
be a collision unless you also brake.
Automatic emergency braking cannot prevent
a collision. There is a risk of an accident.
Always apply the brakes yourself and try to
take evasive action.
G
WARNING
PRE-SAFE
®
Brake cannot always clearly
identify objects and complex traffic
conditions.
In these cases, PRE-SAFE
®
Brake may:
R
give an unnecessary warning and then
brake the vehicle
R
not give a warning or intervene
There is a risk of an accident.
Always pay particular attention to the traffic
situation and be ready to brake, especially if
PRE-SAFE
®
Brake warns you. Terminate the
intervention in a non-critical driving situation.
In order to maintain the appropriate distance
to the vehicle in front and thus prevent a
collision, you must apply the brakes yourself.
G
WARNING
PRE-SAFE
®
Brake does not react:
R
to people or animals
R
to oncoming vehicles
R
to crossing traffic
R
when cornering
As a result, PRE-SAFE
®
Brake may neither
give warnings nor intervene in all critical
situations. There is a risk of an accident.
Always pay careful attention to the traffic
situation and be ready to brake.
In the event of snowfall or heavy rain, the
recognition can be impaired.
Recognition by the radar sensor system is
also impaired in the event of:
R
dirt on the sensors or anything else
covering the sensors
R
interference by other radar sources
R
there are strong radar reflections, for
example in parking garages
R
a narrow vehicle traveling in front, e.g. a
motorbike
R
a vehicle traveling in front on a different line
relative to the center of your vehicle
Following damage to the front end of the
vehicle, have the configuration and operation
of the radar sensors checked at a qualified
specialist workshop. This also applies to
collisions at low speeds where there is no
visible damage to the front of the vehicle.
Function
X
To activate/deactivate: activate or
deactivate PRE-SAFE
®
Brake in the on-
board computer (
Y
page 198).
If the PRE-SAFE
®
Brake is not activated, the
æ symbol appears in the multifunction
display.
Starting at a speed of around 4 mph
(7 km/h), this function warns you if you
rapidly approach a vehicle in front. An
intermittent warning tone will then sound and
the · distance warning lamp will light up
in the instrument cluster.
X
Brake immediately to defuse the situation.
or
X
Take evasive action provided it is safe to do
so.
PRE-SAFE
®
Brake can also brake the vehicle
automatically under the following conditions:
R
the driver and front-passenger have their
seat belts fastened
68
Driving safety systems
Safety