Craftsman 81079 User Manual
Page 15
Advertising
15
RESISTANCE MEASUREMENTS
WARNING: To avoid electric shock, disconnect power to the
unit under test and discharge all capacitors before taking any
resistance measurements. Remove the batteries and unplug
the line cords.
1. Set the function switch to the
! position.
2. Insert the black test lead banana
plug into the negative (COM) jack
Insert the red test lead banana
plug into the positive ! jack.
3. Touch the test probe tips across
the circuit or part under test. It is
best to disconnect one side of the
part under test so the rest of the
circuit will not interfere with the
resistance reading.
4. Read the resistance in the display.
Advertising