Mercedes-Benz M-Class 2012 Owners Manual - Manual (Page 293)

EASY-PACK load-securing kit
Components and storage
The EASY-PACK load-securing kit allows you
to use your cargo compartment for a variety
of purposes. The accessory parts are located
under the trunk floor.
X Open the trunk floor (
Y
page 292).
EASY-PACK load-securing kit accessory parts
:
Bag containing the brackets and luggage
holder
; Telescopic rod
Inserting the brackets into the loading
rail
X
Insert bracket : into the center of loading
rail ?.
X Press release button ; and push
bracket : into the desired position in
loading rail ?.
X Let go of release button ;.
X Press locking button =.
Bracket : is locked in loading rail ?.
X If necessary, fold cargo tie-down ring A
upwards.
G WARNING
Distribute the load on the cargo tie down rings
evenly.
Otherwise, vehicle occupants could be
injured by objects being thrown around if you:
R brake sharply
R change direction suddenly
R are involved in an accident
Please observe the loading guidelines.
Luggage holder
The luggage holder can be used to secure
light loads against the side wall of the cargo
compartment to prevent them from moving
around.
! Only use the luggage holder to secure
cargo with a maximum weight of 15.4 lb
(7 kg) and with dimensions that the luggage
holder can safely and securely contain.
X To install: insert two brackets A into the
left or right loading rail (
Y
page 291).
X Press release button : of the luggage
holder and pull the strap out slightly.
X
Insert luggage holder ; into brackets A
and, while doing so, press release button
= and push the luggage holder downwards
until it engages.
Stowage areas
291
Stowing
and
feat
ures
Z