Towing and tow-starting, Important safety notes, Breakdown assistance – Mercedes-Benz C-Sedan 2012 Owners Manual User Manual

Page 304

Advertising
background image

X

Switch off all electrical consumers (e.g. radio, blower, etc.).

X

Open the hood (

Y

page 278).

Position number B identifies the charged battery of the other vehicle or an equivalent jump-
starting device.

X

Slide cover : of positive terminal ; in the direction of the arrow.

X

Connect positive terminal ; on your vehicle to positive terminal = of donor battery B
using the jumper cable, beginning with your own battery.

X

Start the engine of the donor vehicle and run it at idling speed.

X

Connect negative terminal ? of donor battery B to earth point A of your vehicle using
the jumper cable, connecting the jumper cable to donor battery B first.

X

Start the engine.

X

Allow the engine to run for a few minutes before disconnecting the jumper cable.

X

First, remove the jumper cable from earth point A and negative terminal ?, then from
positive terminal ; and positive terminal =, each time disconnecting from the contacts
on your own vehicle first.

X

After removing the jumper cable, close cover : on positive terminal ;.

X

Have the battery checked at a qualified specialist workshop, e.g. an authorized Mercedes-
Benz Center. The jump-starting procedure is not a standard operating state; therefore, have
the battery checked.

Towing and tow-starting

Important safety notes

G

WARNING

If you tow the vehicle, you must use a rigid
towing bar if:

R

the engine is not running.

R

there is a brake system malfunction.

R

there is a malfunction in the power supply
or the vehicle's electrical system.

The power assistance for the steering and the
brake force booster do not work when the

302

Towing and tow-starting

Breakdown assistance

Advertising