Wheels and tires, Tire pressure – Mercedes-Benz C-Coupe 2012 Owners Manual User Manual

Page 306

Advertising
background image

If the tire pressure monitor is
malfunctioning, it may take more than
10 minutes for the tire pressure warning
lamp to inform you of the malfunction by
flashing for 60 seconds and then remaining
lit.
When the malfunction has been rectified,
the tire pressure warning lamp goes out
after driving for a few minutes.

Information on tire pressures is displayed in
the multifunction display. After a few minutes
of driving, the current tire pressure of each
tire is shown in the multifunction display.

i

The tire pressure values indicated by the

on-board computer may differ from those
measured at a gas station with a pressure
gauge. The tire pressures shown by the on-
board computer refer to those measured at
sea level. At high altitudes, the tire pressure
values indicated by a pressure gauge are
higher than those shown by the on-board
computer. In this case, do not reduce the
tire pressures.

i

The operation of the tire pressure monitor

can be affected by interference from radio
transmitting equipment (e.g. radio
headphones, two-way radios) that may be
being operated in or near the vehicle.

i

USA only:

This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions:
1. This device may not cause interference,
and
2. this device must accept any interference
received, including interference that may
cause undesired operation.
Any unauthorized modification to this
device could void the user’s authority to
operate the equipment.

i

Canada only:

This device complies with RSS-210 of
Industry Canada. Operation is subject to
the following two conditions:

1. This device may not cause interference,
and
2. this device must accept any interference
received, including interference that may
cause undesired operation of the device.
Any unauthorized modification to this
device could void the user’s authority to
operate the equipment.

Checking tire pressure electronically

X

Make sure that the SmartKey is in position
2 (

Y

page 125) in the ignition lock.

X

Press the = or ; button on the
steering wheel to select the

Service

menu.

X

Press the 9 or : button to select

Tire Pressure

.

X

Press the a button.
The current tire pressure for each wheel will
be displayed in the multifunction display.

If the vehicle has been parked for longer than
20 minutes, the

Tire pressures will be

displayed after driving a few

minutes

message appears in the display.

After a teach-in period, the tire pressure
monitor automatically recognizes new wheels
or new sensors. If a clear allocation of the tire
pressure values to the individual wheels is not
possible, the

Tire Pressure Monitor

Active

message is shown instead of the tire

pressure display. The tire pressures are
already being monitored.

i

If a spare wheel/emergency spare wheel

is mounted, the system may continue to
show the tire pressure of the wheel that has
been removed for a few minutes. If this
occurs, note that the value displayed for
the position where the spare tire is
mounted is not the same as the spare
wheel/emergency spare wheel's current
tire pressure.

304

Tire pressure

Wheels and tires

Advertising
This manual is related to the following products: