Mercedes-Benz E-Coupe 2011 COMAND Manual - Manual (Page 134)

Station presets
X Select a preset by turning cVd the
COMAND controller and press and hold
W until you hear a tone.
or
X Press and hold a number button, e.g. 4,
until you hear a tone.
The channel is stored under the preset.
Storing channels automatically
This function automatically stores channels
with adequate reception in the preset
memory. Channels stored manually in the
preset memory will be overwritten.
X
Option 1: press W the COMAND controller
when the display/selection window is
active.
X Select Autostore in the presets by turning
cVd the COMAND controller and press
W to confirm.
X Option 2: select Presets in the submenu
bar by sliding VÆ and turning cVd the
COMAND controller and press W to
confirm.
X Select Autostore and press W to confirm.
In both cases, COMAND searches for
channels that can be received. You will see
a message to this effect. The available
channels are automatically stored in the
preset positions.
X To cancel storing: select Cancel and
press W to confirm.
Selecting a channel from the preset list
X To call up the preset list: select
Presets by turning cVd the COMAND
controller and press W to confirm.
The channel preset list appears.
X
To set a channel: select a preset by
turning cVd the COMAND controller and
press W to confirm.
or
X
Press a number key, e.g. 4.
Displaying information
X Select Info in the submenu bar by turning
cVd the COMAND controller and press
W to confirm.
Information on the currently received
program is displayed.
1 Category and channel number
2 Channel name
3 Artist
4 Tracks
If available, you see:
R the full channel name
R the artist of the track that is currently being
played
R the track that is currently being played
X
To return to the satellite radio main
menu: confirm Info by pressing W.
X Slide ZV the COMAND controller up.
132
Satellite radio
Audio