Starter switch positions, Smartkey, Controls in detail – Mercedes-Benz M-Class 2009 Owners Manual User Manual
Page 96
Starter switch positions
94
To interrupt the closing procedure, press or
pull the door-mounted remote tailgate
switch or press button i on the
SmartKey.
In vehicles with power tailgate you can close
the tailgate from the inside using the remote
tailgate switch.
If the tailgate comes into contact with an
object while closing (e.g. luggage that has
been piled too high) the closing procedure is
stopped and the tailgate reopens.
X
Switch on the ignition.
X
Press remote tailgate switch
1
until the
tailgate begins to close.
The tailgate closes. While the tailgate is
closing an acoustic warning sounds.
To interrupt the closing procedure:
X
Press or pull remote tailgate switch
1
.
Limiting opening height of tailgate
You can limit the opening height of the
tailgate in the upper opening range. This can
be useful, for example, when the space above
the tailgate is not sufficient.
Activating
X
Open tailgate: Pull on handle (
or press and hold button
i
on the
SmartKey until the tailgate opens.
X
Stop opening procedure: When the
tailgate is in the desired position, press
tailgate closing switch (
page 92) or press
button
i
on the SmartKey once more.
i
You can also press or pull the remote
opening procedure.
X
Press and hold the tailgate closing switch
in the tailgate (
short acoustic signal.
The opening height of the tailgate is limited.
The tailgate will now stop at the stored
position when opened.
Deactivating
X
Press and hold the tailgate closing switch
in the tailgate until you hear two short,
consecutive acoustic signals.
Starter switch positions
Starter switch
}
For removing SmartKey
$
Power supply for some electrical
consumers, e.g. radio
%
Ignition (power supply for all electrical
consumers) and driving position
&
Starting position
When you switch on the ignition, all lamps
(except high-beam headlamp indicator lamp,
and turn signal indicator lamps unless
activated) in the instrument cluster come on.
If a lamp in the instrument cluster fails to
come on when the ignition is switched on,
Controls in detail