Mercedes-Benz SLK-Class 2008 COMAND Manual - Manual (Page 129)

129
Navigation*
Destination entry
1 "Hours" longitude value
2 "Minutes" longitude value
3 "Seconds" longitude value
4 "Seconds" latitude value
5 "Minutes" latitude value
6 "Hours" latitude value
̈ Press  or  to select the value you
wish to set.
̈ Select the desired value using 
or  .
̈ Keep repeating the last two steps until
you have set the required longitude and
latitude.
̈ Press  .
If the coordinates entered are located
in the digital map range, the display will
switch to map display with cursor. The
center point of the cursor indicates the
position of the coordinates entered on
the map.
̈ Press .
The Start Route Guidance menu
(
୴ page 131) appears if route guidance
has not yet been activated.
̈ Press  .
Route calculation begins.
If route guidance is already active, you
will be prompted to confirm that you
wish to use the coordinates set as the
new destination.
̈ Press  to select Yes .
̈ Press  .
Route calculation begins.
i
To store the indicated position, press
the
Memory soft key. For details on stor-
ing map locations ( ୴ page 130).
i
Route guidance is only possible to co-
ordinates within the digital map range.