Mercedes-Benz G-Class 2008 COMAND Manual - Manual (Page 54)

54
Audio
CD operation
1 Ejecting audio CD
2 Opening/closing the display unit
3 Warning message
Press EJECT to
close
̈ With the COMAND switched on, press
l.
The display unit moves forward and
then tilts down. The CD AUDIO slot is
visible.
̈ Press the l button left of the
CD AUDIO slot to eject a CD already
loaded.
̈ Remove the CD from the slot.
̈ Insert a CD into the slot. The CD should
be inserted with the label side up.
The COMAND pulls the CD in.
̈ Press l on the display unit to return
the display unit to its closed position.
The display unit tilts up and then moves
to the rear.
Playback begins with track number
one.
The message
CD error
will appear if
there is a media error.
̈ Remove the CD or switch to
another operation.
Warning
G
The display unit can cause injury if
contacted when open. Please close after
inserting an audio CD.
!
Do not place anything on the lowered
display panel (i.e. do not attempt to use
as a shelf). Placing objects on the
lowered display panel may result in
damage to the display or COMAND
unit which is not covered by the
Mercedes-Benz Limited Warranty.
i
Inserting a second CD with another CD
still loaded will cause damage to the
CD drive which is not covered by the
Mercedes-Benz Limited Warranty.
i
The message Press EJECT to close will
appear. If l on the display unit is
not pressed within 20 seconds, eight
successive series of two beep tones
will sound to remind you to return the
display to its closed position by
pressing
l on the display unit. After
the beep tones COMAND returns the
display unit to its closed position.