Mercedes-Benz E-Wagon 2007 COMAND Manual - Manual (Page 146)

145
Navigation*
During route guidance
You can set the following to be displayed in
the status bar:
ț Time of arrival/Dist. to Dest.
If the full-screen map display is activat-
ed (
୴ page 131), the estimated time of
arrival and the remaining distance to
the destination will be displayed. If you
have entered a stopover destination
(
୴ page 140), the corresponding data
will be displayed.
ț Current-Location display
If the full-screen map display is activat-
ed (
୴ page 131), the following data will
be displayed:
ț The current position as coordi-
nates.
ț The number of satellites that can
currently be received.
ț The current elevation (ALT = alti-
tude) above sea level.
ț No display
The name of the current road is dis-
played.
̈ In the Display menu ( ୴ page 143),
press the
Map
soft key.
The possible options appear.
̈ Use % or &0to select the desired
option.
̈ Press '.
The map display is switched.
̈ Finally, press the Back soft key or wait
for the screen to change.
i
During route guidance, a symbol will
appear on the left-hand side of the bot-
tom status bar if map display is
switched ON.
ț North symbol :
Fixed map orientation, north is al-
ways pointing up,
ț Compass symbol :
Dynamic map orientation, driving
direction is always pointing up.
Map display menu
i
The COMAND uses GPS to calculate
the elevation above sea level. For rea-
sons of tolerance, this value may devi-
ate from the actual value.
i
The solid circle shows the current
setting.