Mercedes-Benz R-Class 2007 Owners Manual - Manual (Page 196)

195
Controls in detail
Control system
Ending a call
̈ Press button
t.
You have ended the call. The standby
message appears in the multifunction
display.
Dialing a number from the phone book
If your telephone is ready to receive calls,
you may select and dial a number from the
phone book at any time.
̈ Press button ÿ or è repeatedly
until the message Tel appears in the
multifunction display.
̈ Press button j or k.
The control system reads the phone
book which is stored in the telephone.
This may take several minutes. The
message
Please wait appears in the
multifunction display.
When the message Please wait
disappears, the phone book has been
loaded.
̈ Press button j or k repeatedly
until the desired name appears in the
multifunction display.
The stored names are displayed in
ascending or descending alphabetical
order.
1 Name from the phone book
̈ Press button
s.
The system dials the selected phone
number.
ț If the connection is successful and
this feature is supported by your
network provider, the name of the
party you are calling (if stored in
your phone book) and the duration
of the call will appear in the multi-
function display.
ț If no connection is made, the
control system stores the dialed
number in the redial memory.
i
If you press and hold j or k for
longer than 1 second, the system scrolls rapidly
through the list of names until you release the
button again.
Cancel the quick search mode by pressing
button
t.